Sealer?s Choice Gold ? Rapid Cure
Sealer?s Choice Gold ? Rapid Cure is a premium grade, high performance penetrating / impregnating stone, tile & grout sealer. It is a low VOC, water-basedsealer formulated to provide maximum stain protection, especially in food preparation and serving areas. Ideal for all interior and exterior natural stone, tile & grout surfaces. This premium sealer also includes built-in Microban ? Cured Sealant is Mould & Mildew Resistant, and this sealer lasts up to 15 years.
Maximum stain protection
May be used as a pre-grouting sealer
Allows moisture vapor transmission
The NEW Rapid Cure Formula protects in less than 4 hours
Now with built-in Microban ? Cured Sealant is Mould & Mildew Resistant
Safe to use, water based low VOC formula
Does not alter the slip resistance of sealed surface
Designed to achieve optimal penetration into dense, low-porosity surfaces
Last up to 15 years
Suitable for use:
As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished concrete, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior use.
Do not allow sealer to come in contact with any non-recommended surface.
If product is allowed to dry on surface, a white film may form. If this occurs, scrub with Aqua Mix NanoScrub and a white nylon pad.
Sealer will not prevent surface wear or etching from acids or caustic chemicals.
Surface should be dry, clean and free of waxes, sealers or finishes. New installations need to be dry 24 hours before application. Protect surrounding surfaces. Test product in an inconspicuous area to ensure desirable results.
The Stone, Tile or Grout must be dry prior to applying sealer ? the following document explains in detail the definition of the term ?dry? as it relates to sealer application. READ MORE
Pre-Grout Sealer/Grout Release:
Porous tile and stone can be stained by grout during installation. Sealing the tile before grouting will make grout removal much easier. Apply sealer according to directions after tile has been bonded for a minimum of 24 hours, or apply to front face of tile before installation. Wait a minimum of 2 hours before grouting.
1. Always test a small area first to ensure satisfactory results.
2. Apply using a pump sprayer, paint pad applicator, lambswool applicator, sponge or brush.
3. Allow it to penetrate for up to 5 minutes, if surface is drying within 5 minutes, apply more sealer to keep surface wet for up to 5 minutes.
4. Wipe surface completely dry using clean, dry cotton, paper or microfiber towels after each application. Ensure no sealer is allowed to dry on the surface.
5. Porous surfaces may require additional applications.
6. Conduct a test to see if surface is completely sealed after 2 hours by applying drops of water on the surface. If it penetrates, an additional application is required.
Allow 30 minutes drying time between applications when conditions are 20? Celsius and 70% RH. If temperatures are lower or humidity higher than these times may be longer. If unsure about the specific job site temperatures and conditions please contact one of our technical advisors.
Ready for surface traffic in minimum of 2 hours.
Keep dry for a minimum of 12 hours.
Achieves a full cure in minimum of 24 hours.
Cleaning of equipment
Clean tools with mineral spirits after use
Product Data Sheets:
Technical Data Sheet
Safety Data Sheet
Problem Solving Guide
How to Guide:
How to apply a Natural Look Sealer
Maximum VOCs: <70 grams per litre Available in: 473ml, 946ml, 3.8L, 19L Product Maintenance: General Maintenance Guide for surfaces sealed with a Penetrating SealerSealer?s Choice Gold Ad: Click here Approx. Coverage m? per/L: Polished Honed Textured Marble 20-25m? 12-15m? 8-12m? Limestone 18-22m? 8-12m? 6-10m? Travertine 20-25m? 12-15m? 8-12m? Granite 25-30m? 15-20m? 10-14m? Bluestone / Basalt 20-25m? 12-15m? 8-12m? Sandstone 14-18m? 10-14m? 6-10m? Slate N/A 14-18m? 10-14m? Concrete 18-22m? 8-12m? 6-10m? Terrazzo 20-25m? 15-20m? 10-14m? Terracotta N/A N/A 8-12m? Porcelain 25-35m? 20-30m? 15-20m?