ARDEX Wpm #300 Grey PART A,B Kit 10L Each

(Hydrepoxy) Membrane/ Barrier Coating

ARDEX WPM 300
Water resistant, prevents rising damp, efflorescence and withstands hydrostatic pressure
Excellent adhesion to most substrates including damp surfaces and freshly laid green concrete
Safe to use in sensitive locationsINFORMATION ARDEX WPM 300
ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

Can be applied to damp surfaces
AS 4020:2000 Potable Water Approved
Hydrostatic pressure resistant waterproof membrane
Prevents rising damp and formation of efflorescence
Water based ? safe to use in sensitive locations
Green Star ? meets the benchmark for VOC credit in the Green Building Council of Australia?s Rating Tools

TECHNICAL DATA ARDEX WPM 300
Location:
Low water vapour transmission coating and as a barrier/seal coating over freshly laid or damp concrete. Waterproofing barrier on the negative side in below grade surfaces such as basements, tunnels, liftwells, retaining walls and carparks. Waterproofing membrane or barrier coating over freshly laid hardened concrete, prior to the application of conventional levelling compounds carpet and tile adhesives. As a barrier seal coating over damp, green or efllorescence producing concrete prior to overcoating with conventional building paints.

Colours
Grey
Mojo Black

Coverage
Water Stop ? 60m2 (1 coat)
Waterproof membrane ? 30m2 (2 coats)
Drying Times
Recoat time: 4 hrs
Full cure: 7 days
Pack Size: 4L / 20L kits
VOC content:
26g/L