(Hydrepoxy) Membrane/ Barrier CoatingARDEX WPM 300Water resistant, prevents rising damp, efflorescence and withstands hydrostatic pressureExcellent adhesion to most substrates including damp surfaces and freshly laid green concreteSafe to use in sensitive locationsINFORMATION ARDEX WPM 300ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.Can be applied to damp surfacesAS 4020:2000 Potable Water ApprovedHydrostatic pressure resistant waterproof membranePrevents rising damp and formation of efflorescenceWater based – safe to use in sensitive locationsGreen Star – meets the benchmark for VOC credit in the Green Building Council of Australia-s Rating ToolsTECHNICAL DATA ARDEX WPM 300Location:Low water vapour transmission coating and as a barrier/seal coating over freshly laid or damp concrete. Waterproofing barrier on the negative side in below grade surfaces such as basements, tunnels, liftwells, retaining walls and carparks. Waterproofing membrane or barrier coating over freshly laid hardened concrete, prior to the application of conventional levelling compounds carpet and tile adhesives. As a barrier seal coating over damp, green or efllorescence producing concrete prior to overcoating with conventional building paints.ColoursGreyMojo BlackCoverageWater Stop – 60m2 (1 coat)Waterproof membrane – 30m2 (2 coats)Drying TimesRecoat time: 4 hrsFull cure: 7 daysPack Size: 4L / 20L kitsVOC content:26g/L
Sale!
ARDEX Wpm #300 Grey PART A,B Kit 10L Each
"*" indicates required fields