Z Bond- 6S is a one component, non -flowing, NEUTRAL cure, MID modulus silicone sealant. It cures by absorption of atmospheric moisture to form a flexible and durable elastomeric sealant. Z Bond- 6S contains an effective fungicide, to reduce the growth of mould and mildew. Because it is a neutral curing system, it is more pleasant to work with particularly in a confined space. It also offers excellent adhesion to powder coated metal.The thixotropic nature of this product ensures that it will not slump in typical construction joints. Meets the standard of NZFSA – C82 (Titanium / off white).TYPICAL USESBathrooms, Fibreglass Spa Units, Shower screens,Ceramic tiles,Tiles and grout areas. (for Granite, Marble and some porous stones, use / refer to Bostik 5CLM data sheet) Around edges of kitchen bench tops,Edges of splash backs (*Not to be used on the back of splash backs, refer to Bostik V:60)Cool Rooms.APPLICATION Always ensure that the surfaces to be sealed are dry and free from oil, dirt and grease.Use the two-wipe process for impervious substrates. Ensure the cloths are clean and changed frequently, and use a suitable cleaner/solvent such as Z Bond- R-40, or IPA. When extruding the sealant cut the nozzle to the desired width, cut the tip off the cartridge, and apply the sealant firmly to ensure good contact between the sealant and the substrate.Before the sealant has skinned, tool it off to ensure a good finish, and to improve the wetting out of the sealant to the substrate. To achieve satisfactory adhesion a primer may be required for some substrates. Consult Bostik or your distributor for more information.