Megapoxy PM

Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. Its easy to use 1:1 mixing make it suitable for onsite applications.

USES

BONDING

• Precast concrete articles
• Grouting bolts
• Natural stones
• Bricks and ceramics
• Metals

FILLING AND REPAIR

• Concrete Pipes and Tanks
• Fibreglass articles
• Concrete floors and stairs
• Concrete columns
• Insitu formed concrete

SURFACE

• METALS: PREPARATION Should be grit blasted to clean surface. Mechanically abraded and degreased. Wire brushing is not entirely satisfactory and gives minimal adhesion only.
• PAINTED SURFACES: A proprietary brand paint stripper should be used. Concrete – the surface may be either flame cleaned or mechanically abraded.

Processing Data

• MIXING RATIO: 1 part resin to 1 part hardener by volume
• MIXING: Mix until uniform grey or white
• WORKING LIFE AT 25°C: 45 minutes
• MINIMUM APPLICATION TEMPERATURE: 10°C
• MINIMUM CURE TIME: 12 hours at 25°C
• FULL CURE TIME: 4 days at 25°C